====== Advanced Features of Classrooms ====== ===== Ritter Annex 565 ===== Ritter Annex is equipped with 9 student "pods", and, at each pod, there is a wall-mounted large TV screen. Please see below for instructions on using the equipment and LanSchool in RA565. You can click on the images to expand the size. See photos of the room on the [[https://cphapps.temple.edu/cls/RTTERX_00565 | Classroom Lookup System]]. ==== Turing on the projector and TVs ==== Please follow these steps for navigating the touch panel in this room (or [[https://temple.hosted.panopto.com/Panopto/Pages/Viewer.aspx?id=e9735017-4a5d-4e9c-82f7-aecc013edc80 | watch this quick video]] to see it in action) ^ ^ ^ | 1. Touch on the screen to activate the system | {{:it:teaching:classroomteach:wfica32_pcqdkawaok.png?400&direct}} | | 2. Press **PC** to turn on the projector in the room | {{:it:teaching:classroomteach:wfica32_rc08acrkuc.png?400&direct}} | | 3. You will a message along the top that says **Projector is Warming** | {{:it:teaching:classroomteach:wfica32_dmm8oigaji.png?400&direct}} | | 4. When you see **Projector is On** along the top, you are ready to turn on the TVs in the room | {{:it:teaching:classroomteach:wfica32_sm4jb3nx2v.png?400&direct}} | | 5. Press **Environment** | {{:it:teaching:classroomteach:wfica32_urfrwqhnt9.png?400&direct}} | | 6. Below the word Monitors, press **On** | {{:it:teaching:classroomteach:wfica32_wsptcrtnjo.png?400&direct}} | | 7. You will see the TVs begin to wake up | | ==== Using Lanschool to Show the Teacher Screen to the TVs throughout the Room ==== [[https://temple.hosted.panopto.com/Panopto/Pages/Viewer.aspx?id=0c59fecf-8a5a-40b6-bea5-aeae0179003a| View a Video Tutorial]] ^ ^ ^ | 1. After you have signed into the computer, double-click on the Lanschool icon found on the desktop | {{:it:teaching:classroomteach:chrome_ooprtox0ex.png?direct&400|}} | | 2. The Lanschool Teacher Console will open | {{:it:teaching:classroomteach:unnamed.jpg?direct&400|}} | | 3. Click in the center of the **Show** button to show what is on your screen to the TVs throughout the room | {{:it:teaching:classroomteach:applicationframehost_7evpsjjcou.png?direct&400|}} | | 4. Click in the center of the **Show** button again to stop showing your screen to the TVs throughout the room (this button works like a toggle) | | ==== Using Lanschool to Show a Student Screen to the rest of the TVs Throughout the Room ==== ^ ^ ^ | 1. In the Lanschool Teacher Console, select a student screen to show to the rest of the screens | | | 2. A red box will go around that selected screen | {{:it:teaching:classroomteach:chrome_ilzsofvume.png?direct&400|}} | | 3. Click on **Show Student** | {{:it:teaching:classroomteach:chrome_4haly5kwlu.png?direct&400|}} | | 4. To stop showing that screen, click on **Show Student** again | | ==== Shutting Off the Projector ==== ^ ^ ^ | 1. Press **System Shutdown** | {{:it:teaching:classroomteach:wfica32_lxm8v8vmnu.png?400&direct}} | | 2. Then press **Shutdown Without Password** | {{:it:teaching:classroomteach:wfica32_n0004p1551.png?400&direct}} | /* ===== Pearson 148 ===== **Pearson 148** There are two monitors at the instructor station in Pearson 148 labeled "PC Primary" and "PC Secondary." The panel in this room allows instructors to show what is on one monitor to both projector screens or choose to show one to the right screen and the other to the left screen. ==== Turing on the Projector, Selecting Monitors to Show on Projector Screen, and Muting the Screen ==== Take a look at the step-by-step instructions below or view [[https://ensemble.temple.edu/Watch/Gi69SeZq | Demo of Pearson 148 Panel]] (2:59) for a full video walk-through. ^ ^ ^ | 1. Touch the screen to activate the system | {{:it:teaching:classroomteach:wfica32_deuibbg8hj.png?400&direct}} | | 2. Press **PC Primary** | {{:it:teaching:classroomteach:wfica32_g0gnpik7mf.png?400&direct}} | | 3. Press **Send to Left Projector** and **Send to Right Projector** | {{:it:teaching:classroomteach:hqcqjyphvi.png?400&direct}} | | 4. If you would like to send the image that is on the monitor labeled PC Secondary, press **PC Secondary** | {{:it:teaching:classroomteach:umycu7ds9d.png?400&direct}} | | 5. Then press **Send to Left Projector** and **Send to Right Projector** to send the image from PC Secondary | {{:it:teaching:classroomteach:8a3pg7rtxg.gif?400&direct}} | | 6. Or, choose to send PC Secondary to one of the screens by pressing either **Send to Left Projector** or **Send to Right Projector** | {{:it:teaching:classroomteach:9ucnlvrvzg.gif?400&direct}} | | 7. Press the **Picture Mute** button to mute the screen and press it again unmute the screen | {{:it:teaching:classroomteach:dmpxbxgpxn.gif?400&direct}} | ==== Adjusting the Camera ==== ^ ^ ^ | 1. If you are using lecture capture or Zoom, you can adjust the camera angle by pressing **Camera** | {{:it:teaching:classroomteach:jgvdwmldms.png?400&direct}} | | 2. Use the Zoom In/Out and arrows to adjust as needed, or select one of the presets that are already set up. You can view the camera angle by pressing **Send to Right Projector** or **Send to Left Projector** | {{:it:teaching:classroomteach:wfica32_vcliogdlky.png?400&direct}} | ==== Shutting Down the Projector ==== ^ ^ ^ | 1. Press **System Shutdown** | {{:it:teaching:classroomteach:wfica32_9s0wo0ny3e.png?400&direct}} | | 2. Press **Shutdown without Password** | {{:it:teaching:classroomteach:8xuigglpiq.png?400&direct}} | ===== Weiss Hall 351 ===== Weiss 351 has two large monitors on the wall. Take a look at the room on the [[https://cphapps.temple.edu/cls/WEISS_00351 | Classroom Lookup System]]. ^ ^ | 1. To turn on the monitors, press the button next to **Computer** so that is says **On** for left monitor and right monitor | {{:it:teaching:classroomteach:chrome_x206sq0ihw.gif?direct|}} | | 2. If you would like to use your laptop, press the button next to **Laptop** so that is says **On** for left monitor and right monitor and plug in your laptop. (Press the button to **On** for any of the other sources (Apple TV, Camera) to display them on the monitors.) | | ==== Using Breakout Mode ==== ^ ^ | 1. If you would like to the use the monitors as "breakouts" (allowing students to log into them and work on projects together), press the **Local Breakout** button on the touch panel. | {{:it:teaching:classroomteach:chrome_mlzsoqubfp.gif?direct|}} | | 2. Then press **PC** on the wall mounted panel below each monitor. Students can use the keyboards to log in and use them as separate computers. | | | 3. If you want to get out of "breakout" mode, press the **Main** button on the wall mounted panel below each monitor and press **Local Breakout** on the panel again.| | ==== Turning off the System ==== ^ ^ | When you are finished class, press **Turn off System** in the bottom right corner of the panel and then press **Shutdown Without Password**. | {{:it:teaching:classroomteach:chrome_dffz7qw7hj.gif?direct|}} | */ ===== Getting Technical Assistance During Class ===== - On the touch panel, press **Request Help** - Press **Confirm** - A member from the Classroom Technology Support (CTS) will either call in via the panel or come to the room to troubleshoot